GPU nodes - LUMI-G¶
The LUMI-G hardware partition consists of 2978 nodes with 4 AMD MI250x GPUs and a single 64 cores AMD EPYC "Trento" CPU. The aggregated HPL Linpack performance of LUMI-G is 379.70 PFlop/s.
The LUMI-G compute nodes are equipped with four AMD MI250X GPUs based on the 2nd Gen AMD CDNA architecture. A MI250x GPU is a multi-chip module (MCM) with two GPU dies named by AMD Graphics Compute Die (GCD). Each of these dies features 110 compute units (CU) and have access to a 64 GB slice of HBM memory for a total of 220 CUs and 128 GB total memory per MI250x module.
GCDs are GPUs for Slurm and the HIP runtime
From a software perspective as well as from the Slurm perspective, one
MI250x module is considered as two GPUs. It means the LUMI-G nodes can be
considered as 8 GPUs nodes. If you do a hipGetDeviceCount runtime call the
value returned for a full node will be 8.
More information about the AMD MI250x can be found here:
The LUMI-G nodes CPU is a single 64-cores AMD EPYC 7A53 "Trento" CPU. The cores of this CPU are "Zen 3" compute cores supporting AVX2 256-bit vector instructions for a maximum throughput of 16 double precision FLOP/clock (AVX2 FMA operations). The cores have 32 KiB of private L1 cache, a 32 KiB instruction cache, and 512 KiB of L2 cache. The L3 cache is shared between the groups of eight cores and has a capacity of 32 MiB for a total 256 MiB of L3 cache per processor. The CPU is configured as 4 NUMA nodes (NPS4), i.e., 128 GiB of DDR4 memory per NUMA node for a total of 512 GiB CPU memory.
The figure below gives a general overview of a LUMI-G node as well as the topology of the CPU-GPU and GPU-GPU links.
The two GCDs in the MI250x modules are connected by an in-package Infinity Fabric interface that can provide a theoretical peak bidirectional bandwidth of up to 400 GB/s. Additionally, GCDs on different MI250x modules are linked with either a single or double Infinity Fabric link, which can provide a peak bidirectional bandwidth of 100 GB/s and 200 GB/s, respectively.
It is important to note that there is no direct correlation between the GPU (GCD) numbering and the NUMA node numbering. For example, NUMA 0/core 0 is not connected to GPU 0/GCD 0. Properly binding the NUMA node to the GPU might be crucial for achieving optimal performance in your application. The figure below illustrates these links from both the CPU and GPU perspectives.
Each MI250x module is direclty connected to the slingshot 11 network providing up to up to 25+25 GB/s peak bandwidth. Details about the LUMI network is provided here.
To summarize, each MI250x modules have 5 GPU-GPU links, 2 CPU-GPU links and 1 PCIe links to the slingshot-11 interconnect.
The MI250x Graphics Compute Die¶
As mentioned previously, the MI250x GPU modules have 2 Graphics Compute Dies (GCD). Each GCD has 112 physical compute units (CUs) but 2 of these are disabled which means that 110 CU can actually be used. In order to boost memory throughput, all CU share a L2 cache. This L2 cache has an 8 MB capacity and is divided in 32 slices capable of delivering 128 B/clock/slice for a total of 6.96 TB/s peak theoretical bandwidth.
The L2 cache also improve synchronization capabilities for algorithms that rely on atomic operations to coordinate communication across an entire GPU. These atomic operations executed close to the memory in the L2 cache.
When a kernel is dispatched for execution on the GPU, it is in the form of a grid of thread blocks. This grid, as well as the thread blocks themselves, can be one, two, or three-dimensional. The size of the grid or block is determined by the programmer, but there are limits on the size.
- Grid: the number of blocks that can be specified along each dimension is (2147483647, 2147483647, 2147483647)
- Block: the maximum number of threads for each dimension is
(1024, 1024, 1024) with an upper thread block size limit of 1024, i.e.,
size.x * size.y * size.z <= 1024.
About terminology
AMD occasionally refers to thread blocks as workgroups, and to threads as work-items. However, the terms thread and thread block are more commonly used, as they are more familiar to CUDA programmers.
The thread blocks are assigned to one of the 110 compute units (CUs) and are scheduled in groups of 64 threads known as wavefronts. This is comparable to a warp on NVIDIA hardware, with the primary distinction being that a warp consists of 32 threads, while a wavefront comprises 64 threads.
The figure below present a schematic view of a MI250x compute unit.
The way the wavefronts are executed by a compute unit is the following:
- a wavefront consisting of 64 work-items is assigned to one of the 16-wide SIMD units
- the majority of instructions execute in a single cycle, with one instruction necessitating four cycles per wavefront
- as there are four SIMD units per compute unit, allowing four wavefronts to be executed concurrently, the throughput remains constant at one instruction per wavefront per compute unit
The compute units have 512 64-wide 4 bytes Vector General Purpose Regiters (VGPRs). In addition to these registers, the unit also provides access to low latency storage through a 64 kB Local Data Share (LDS). This shared memory is akin to NVIDIA's "shared memory" and is accessible to all threads within a block (workgroup). The LDS allocation is managed by the programmer. Additionally, each compute unit has access to 16 kB of L1 cache.
The vector ALU are completed by matrix cores optimized to execute Matrix Fused Multiply Add (MFMA) instructions. These matrix cores provide significant acceleration for Generalized Matrix Multiplication (GEMM) computations, which are essential for Linear Algebra that plays a key role in most High-Performance Computing applications and AI wokloads. Each compute unit contains four matrix cores, capable of achieving a throughput of 256 FP64 Flops/cycle/CU.
Disk storage¶
There is no local storage on the compute nodes in LUMI-G. You have to use one of the network based storage options.