CPU nodes - LUMI-C¶
The LUMI-C hardware partition consists of 2048 CPU based compute nodes. Some of these nodes contain more memory than others as specified in the table below.
| Nodes | CPUs | CPU cores | Memory | Disk | Network |
|---|---|---|---|---|---|
| 1888 | 2x AMD EPYC 7763 (2.45 GHz base, 3.5 GHz boost) |
128 (2x64) |
256 GiB | none | 1x 200 Gb/s |
| 128 | 2x AMD EPYC 7763 (2.45 GHz base, 3.5 GHz boost) |
128 (2x64) |
512 GiB | none | 1x 200 Gb/s |
| 32 | 2x AMD EPYC 7763 (2.45 GHz base, 3.5 GHz boost) |
128 (2x64) |
1024 GiB | none | 1x 200 Gb/s |
See the Slurm partitions page for an overview of options for allocating these nodes.
CPU¶
Each LUMI-C compute node is equipped with two AMD EPYC 7763 CPUs with 64 cores each running at 2.45 GHz for a total of 128 cores per node. The cores have support for 2-way simultaneous multithreading (SMT) allowing for up to 256 threads per node.
The AMD EPYC 7763 CPU cores are "Zen 3" compute cores, the same core that can be found in the Ryzen 5000 series consumer CPUs. These cores are fully x86-64 compatible and support AVX2 256-bit vector instructions for a maximum throughput of 16 double precision FLOP/clock (AVX2 FMA operations). The cores have 32 KiB of private L1 cache, a 32 KiB instruction cache, and 512 KiB of L2 cache.
The EPYC CPUs consist of multiple chiplets, so-called core complex dies (CCDs). There are 8 CCDs per processor with 8 cores each. The L3 cache is shared between the eight cores of a CCD and has a capacity of 32 MiB for a total 256 MiB of L3 cache per processor. Note this differs from the earlier Zen 2 and EPYC 7002-series processors where 4 cores shared the L3 cache and there were two groups of 4 cores (a "CCX") inside each CCD. This can improve the performance of certain workloads as a single core can have access to more L3 cache.
The CCD units are all connected to a central I/O die which contains the memory controller. There are 8 memory channels with a peak theoretical bandwidth of 204.8 GB/s per socket.
The LUMI-C compute nodes are configured with 4 NUMA zones ("quadrant mode") with 2 CCDs per quadrant. The figure below gives you an overview of the distances between the NUMA nodes.
The two processors within a node are connected by four bi-directional and 16 bit wide links operating at 16 Gbps each. This provides a peak bandwidth of 256 GB/s.
Network¶
The LUMI-C compute nodes each have a single 200 Gb/s interface to the Slingshot-11 interconnect.
Disk storage¶
There is no local storage on the compute nodes in LUMI-C. You have to use one of the network based storage options.