Programming environment

This page will give you an overview of the Cray programming environment that is available on LUMI. It starts with a presentation of the compiler suites and compiler wrappers that you can use to compile your C, C++ or Fortran code. Finally, some basic information on how to compile an MPI or OpenMP program is given.

Compiler Suites

On LUMI, the different compiler suites are accessible using module collections. These collections load the appropriates modules to use one of the supported programming environments for LUMI.

Switching compiler suites

The compiler collections are accessible through modules and in particular, the module load command:

$ module load PrgEnv-<name>

where <name> is the name of the compiler suite. There are 3 collections available on LUMI. The default collection is Cray.

	Description	Module collection
CCE	Cray Compiling Environment	PrgEnv-cray
AMD	AMD ROCm compilers	PrgEnv-amd
GCC	GNU Compiler Collection	PrgEnv-gnu
AOCC	AMD Optimizing C/C++ Compiler	PrgEnv-aocc

For example, if you want to use the GNU’s compiler collection:

$ module load PrgEnv-gnu

After you have loaded a programming environment, the compiler wrappers (cc, CC and ftn) are available.

PrgEnv-aocc broken in 21.08 and 21.12

The PrgEnv-aocc module does not work correctly in the 21.08 and 21.12 releases of the Cray programming environment. This is due to different reasons. The aocc/3.0.0 module (used as the default version of AOCC in the 21.08 release) is broken since the compilers themselves are not installed. The aocc/3.1.0 module has a bug in the code of the module. This has been fixed in later releases of the Crey programming environment so that the problem will be solved when those releases are installed. Due to the way the installation of the Cray programming environment works, it is currently not possible for us to correct the module by hand.

Changing compiler versions

If the default compiler version does not suit you, you can change the version after having a loaded a programming environment. This operation is performed using the module swap command.

$ module swap <compiler> <compiler>/<version>

where <compiler> is the name of the compiler module for the loaded programming environment and <version> the version you want to use. For example

CCEGNU

$ module swap cce cce/11.0.2

$ module swap gcc gcc/10.2.0

Compiler Wrappers

The module collection provides wrappers to the C, C++ and Fortran compilers. The command used to invoke these wrappers are listed below.

• cc: C compiler
• CC: C++ compiler
• ftn: Fortran compiler

No matter which vendor's compiler module is loaded, always use one of the above commands to invoke the compiler. Using these wrappers will invoke the underlying compiler according to the compiler suite that is loaded in the environment. For some libraries, the appropriate option for the linking will also be included. See here for more information.

About MPI Wrappers

The Cray compiler wrappers replace other wrappers commonly found on HPC systems like the mpicc, mpic++ and mpif90 wrappers. You don't need to use these wrappers to compile an MPI code on LUMI. See here.

Below are examples on how to use the wrappers for the different programming languages.

CC++Fortran

$ cc -c source1.c
$ cc -c source2.c
$ cc source1.o source2.o -o myprogram 

$ CC -c source1.cpp
$ CC -c source2.cpp
$ CC source1.o source2.o -o myprogram 

$ ftn -c source1.f90
$ ftn -c source2.f90
$ ftn source1.o source2.o -o myprogram 

In the example above, no additional options are provided. However, in most cases this is not the case and the arguments used with the commands vary according to which compiler module is loaded. For example, the arguments and options supported by the GNU Fortran compiler are different from those supported by the Cray Fortran compiler.

Wrapper and compiler options

The following flags are a good starting point to achieve good performance:

Compilers	Good performance	Aggressive optimizations
Cray C/C++	-O2 -funroll-loops -ffast-math	-Ofast -funroll-loops
Cray Fortran	Default	-O3 -hfp3
GCC	-O2 -ftree-vectorize -funroll-loops -ffast-math	-Ofast -funroll-loops

Detailed information about the available compiler options are available here:

• Cray Compiling Environment
• The GNU Compilers

The man pages of the wrappers and of the underlying compilers are also a good place to explore the options. The command to access the man pages are presented in the table below.

Language	Wrapper	CCE	GNU
C	man cc	man craycc	man gcc
C++	man CC	man crayCC	man g++
Fortran	man ftn	man crayftn	man gfortran

Choosing the target architecture

When using the Cray programming environment, there is no need to specify compiler flags to target specific CPU architecture, like -march and -mtune in GCC or --offload-arch for GPU compilation. Instead, you load an appropriate combination of modules to choose the target architecture when compiling. These modules influence the optimizations performed by the compiler, as well as the libraries (e.g., which BLAS routines are used in Cray LibSci) used. Here is a list of the relevant CPU target module available on LUMI:

• craype-x86-trento : GPU partition GPUs (LUMI-G)
• craype-x86-milan : CPU partition CPUs (LUMI-C)
• craype-x86-rome : Login nodes and data analytics partition CPUs (LUMI-D)

We recommend that you compile with craype-x86-trento for LUMI-G and craype-x86-milan for LUMI-C, even if the compiler optimizations for these processors are immature at the moment. You have to load these module yourself when compiling your code from a login node as the default module is craype-x86-rome.

In addition to the craype-x86-* modules for the CPUs, craype-accel-* modules can be used to specify the target GPU architecture. Here is a list of the relevant modules:

• craype-accel-amd-gfx90a : GPU partition GPUs (AMD MI250x, LUMI-G)
• craype-accel-nvidia80 : data analytics and visualization GPUs (NVIDIA A40, LUMI-D)

Loading one of these modules will instruct the compiler wrappers to add the necessary flags to optimize for the target GPU architecture. In addition, loading a craype-accel-* module will enable the linking to the GPU transfer library (GTL) used for GPU-aware MPI as well as enabling OpenMP target offload.

Libraries Linking

The wrapper will pass the appropriate linking information to the compiler and linker for libraries accessible via modules prefixed by cray-. These libraries don't require user-provided options in order to be linked. For other libraries, the user should provide the appropriate include (-I) and library (-L) search paths as well as linking command (-l).

If you have used a Cray system in the past, you may be familiar with the legacy linking behavior of the Cray compiler wrappers. Historically, the wrappers built statically linked executables. In recent versions of the Cray programming environment, this is not the case anymore, libraries are now dynamically linked. The following options are available to you to control the behavior of your application

• Follow the default Linux policy and at runtime use the system default version of the shared libraries (so may change as and when the system is upgraded)
• Hard code the path of each library into the binary at compile time so that a specific version is loaded when the application start (as long as the library is still installed). Set CRAY_ADD_RPATH=yes at compile time to use this mode.
• Allow the currently loaded programming environment modules to select the library version at runtime. Applications must not be linked with CRAY_ADD_RPATH=yes and must add the following line to the Slurm script:

export LD_LIBRARY_PATH=${CRAY_LD_LIBRARY_PATH}:$LD_LIBRARY_PATH

Static linking is unsupported by Cray at the moment.

Using the wrappers with build systems

In order to compile an application that uses a series of ./configure, make, and make install commands, you can pass the compiler wrappers in the appropriate environment variables. This should be sufficient for a configure step to succeed.

$ ./configure CC=cc CXX=CC FC=ftn

CMake should automatically detect the Cray environment. If you want to be on the safe side, you can explicitly provide the compilers wrappers at configure time using the flags

cmake \
  -DCMAKE_C_COMPILER=cc \
  -DCMAKE_CXX_COMPILER=CC \
  -DCMAKE_Fortran_COMPILER=ftn \
  <other options>

For other tools, you can try to export environment variables so that the tool you are using is aware of the wrappers.

CC++Fortran

export CC=cc 

export CXX=CC

export FC=ftn
export F77=ftn
export F90=ftn

Compile HIP Code

Using the compiler wrapper

The PrgEnv-cray and PrgEnv-amd programming environments can compile HIP code using the compiler wrapper. The advantage of using the wrapper is that the flags to use the Cray libraries (cray-* modules) are automatically added (including MPI).

PrgEnv-crayPrgEnv-amd

module load PrgEnv-cray
module load craype-accel-amd-gfx90a
module load rocm

CC -xhip -o <yourapp> <hip_source.cpp>

module load PrgEnv-amd
module load craype-accel-amd-gfx90a
module load rocm

CC -xhip -o <yourapp> <hip_source.cpp>

Using hipcc

Unlike the compiler wrappers, hipcc do not add automatically the flags to use the Cray libraries (cray-* modules). Loading a craype-accel-* will have no effect as well, i.e., you need to specify the target GPU architecture yourself with --offload-arch.

Still, you can set the value of HIPCC_COMPILE_FLAGS_APPEND and HIPCC_LINK_FLAGS_APPEND environment variables to make hipcc behave like the Cray compiler wrappers.

module load PrgEnv-amd

export HIPCC_COMPILE_FLAGS_APPEND="--offload-arch=gfx90a $(CC --cray-print-opts=cflags)"
export HIPCC_LINK_FLAGS_APPEND=$(CC --cray-print-opts=libs)

hipcc -o <yourapp> <hip_source.cpp>

Compile an MPI Program

When you load a programming environment, the appropriate MPI module is loaded in the environment: cray-mpich. In addition the craype-network-ofi network target module should be loaded. These two modules are loaded by default when you login to LUMI.

Compiling an MPI application is done using the set of compiler wrappers (cc, CC, ftn). The wrappers will automatically link codes with the MPI libraries. You can see the compiler wrappers as the more the familiar mpicc, mpicxx and mpifort wrappers.

If you are using a build system that uses a configure script, you may need to provide the appropriate variables so that the correct wrapper is used. For example

$ ./configure MPICC=cc MPICXX=CC MPIF77=ftn MPIF90=ftn

For CMake, if you already provided the compiler as described in the previous section, CMake should correctly select the wrappers as the MPI compilers.

GPU-aware MPI

If your application requires a GPU-aware MPI implementation, i.e., pass GPU memory pointers directly to MPI without copy to the host first, then you need to link your code to the GPU Transfer Library (GTL). The compiler wrappers will link automatically to this library if a GPU target module (craype-accel-*) is loaded.

PrgEnv-crayPrgEnv-amd

module load PrgEnv-cray
module load craype-accel-amd-gfx90a
module load rocm

module load PrgEnv-amd
module load craype-accel-amd-gfx90a
module load rocm

Then, for example, we can compile a simple MPI + HIP code with the following command

CC -xhip -o <yourapp> <mpi_and_hip_code.cpp>

and inspect the linking of the resulting executable. That will show that both the MPI and GPU transfer libraries are linked

$ ldd ./yourapp | grep libmpi
    libmpi_cray.so.12 => /opt/cray/pe/lib64/libmpi_cray.so.12
    libmpi_gtl_hsa.so.0 => /opt/cray/pe/lib64/libmpi_gtl_hsa.so.0

GPU support need to be enabled at run time

When your application, you need to enable the GPU support. This is done by setting the value of MPICH_GPU_SUPPORT_ENABLED to 1:

export MPICH_GPU_SUPPORT_ENABLED=1

Compile an OpenMP Application

For all programming environments, the compilation of OpenMP host code is possible by enabling OpenMP when invoking the compiler wrappers (cc, CC, ftn). The flag to enable OpenMP is -fopenmp for all programming environments and compiler wrappers.

Info

When using the OpenMP compiler flag, the wrapper will link to the multithreaded version of the Cray libraries.

Compile an application with OpenMP offloading

Using the PrgEnv-cray, PrgEnv-amd, you can compile application using OpenMP target offloading. Like for OpenMP for the host (CPU), this is done by using the -fopenmp flag but first you need to load a craype-accel-* target module.

PrgEnv-crayPrgEnv-amd

module load PrgEnv-cray
module load rocm
module load craype-accel-amd-gfx90a

module load PrgEnv-amd
module load craype-accel-amd-gfx90a

The craype-accel-amd-gfx90a will instruct the compiler wrappers to automatically add the appropriate flags for OpenMP offloading.

Compile an OpenACC application

At the moment, the only compiler that supports OpenACC compilation on LUMI is the Cray Fortran compiler. OpenACC can enabled by the -hacc flag.

module load PrgEnv-cray
module load craype-accel-amd-gfx90a
module load rocm

ftn -hacc -o <yourapp> <openacc_source.f90>

Accessing the programming environment on LUMI

The Cray programming environment can be accessed in three different ways on LUMI:

1. Right after login, PrgEnv-cray is loaded as most users familiar with Cray systems would expect. The set of target modules is not adapted to the node that you are on but a set that is safe for the whole system. Users are responsible for managing those modules and swapping with an appropriate set. Executing module purge will unload the target modules also and cause error messages when you subsequently try to load a programming environment as some modules (including cray-mpich and cray-fftw) can only be loaded when a suitable target module is loaded.

2. Working in the CrayEnv software stack: (Re)-loading the CrayEnv module will (re)set the target modules to an optimal set for the node type that you are on. Executing module purge will also trigger a reload of CrayEnv, unless the --force option is used to unload the module.

   The CrayEnv stack also provides an updated set of build tools and some other tools useful to programmers in a way that they cannot conflict with tools in the LUMI software stacks (which is why they are not offered in the bare environment).

   We advise users who want to use the Cray programming environment but do not need any of the libraries etc. installed in the LUMI software stacks to use the CrayEnv stack rather than the bare environment.

3. Working in the LUMI software stack: The LUMI software stack offers a range of libraries and packages mostly installed via EasyBuild. It is possible to install additional software on top of those stacks using EasyBuild, and use those libraries and tools to compile or develop other software outside the EasyBuild environment.

   Each LUMI stack corresponds to a particular release of the Cray programming environment. It is possible to use the PrgEnv modules in this environment. However, EasyBuild requires its own set of modules to integrate with the Cray programming environment and we advise users to use those instead when working in the LUMI stack: cpeCray replaces PrgEnv-cray, cpeGNU replaces PrgEnv-gnu, cpeAOCC replaces PrgEnv-aocc and cpeAMD will replace PrgEnv-amd when that environment becomes available on the LUMI-G partition. These modules also take care of the target architecture modules based on the partition module that is loaded (which offer a way to do cross-compiling for another section of LUMI than you are working on).

Workaround for PrgEnv/aocc bug in 21.12

The cpeAOCC/21.12 in LUMI/21.12 contains a workaround for the problems with the aocc/3.1.0 module. Hence it is possible to use the AOCC compilers bh working in the LUMI/21.12 stack and using cpeAOCC/21.12 rather than loading the PrgEnv-aocc module.